Bespoke Eaves Storage
in LondonBravo London Limited designs, builds and fits bespoke cupboards, drawers and shelving into the eaves of your loft, turning the low triangular space along the roofline into calm, considered storage built around the exact pitch of your roof.

From loft conversions and dormer bedrooms to full roof-void storage walls, built to follow the exact pitch of your roof.
The dead space under your roofline, finally put to work.
Every loft conversion and top-floor bedroom has a band of low, sloped space running along the eaves, where the roof meets the outer wall. It is usually left as bare boarding or a small hatch, because standard furniture simply cannot stand in it.
A bespoke eaves storage unit is measured and built to the exact pitch, height and depth of that triangular void, so cupboards, drawers and shelving follow the roofline instead of being boxed off in front of it and wasted twice over.
Done properly, it reclaims a meaningful amount of usable storage in a loft room while keeping the finished wall looking like part of the room's architecture, not a plywood hatch bolted over a gap.
- —Bespoke design
- —Smart use of space
- —Premium finishes
- —Careful measurement
- —Practical storage planning
- —Professional installation
- —Works with any roof pitch
- —Insulated and ventilated correctly
What is eaves storage?
Eaves storage is any built-in cabinetry fitted into the low triangular space where a sloped roof meets the floor of a loft or attic room, typically starting at floor height and following the roof pitch up to the point where the space becomes too shallow to use.
There are three common arrangements: eaves cupboards, with hinged or sliding doors set into a stud wall built along the slope; eaves drawers, pull-out units on runners that make use of the lowest part of the void where a door would be impractical; and full eaves wardrobes, where the entire knee-wall run is converted into one continuous storage wall combining doors, drawers and shelving.
Each arrangement is planned around the room's real roof pitch and the practical reach of getting items in and out of a low space, not a standard off-the-shelf size.
| Feature | Bare Boarding / Hatch | Modular Eaves Boxes | Fully Bespoke Fitted |
|---|---|---|---|
| Fits the roof's exact pitch | No | Partially | Yes |
| Insulated and draught-sealed | No | Rarely | Yes |
| Structural, secure fixing | No | Limited | Yes |
| Finish matched to the room | No | No | Yes |
| Maximises usable floor width | No | Partially | Yes |
| Written 10-year guarantee on qualifying fitted furniture | No | Varies | 10-Year |
Eaves storage designed for every kind of room.
Prefer a full fitted wardrobe or a corner solution instead? Visit our dedicated fitted wardrobes and corner wardrobes pages for the wider range.
01 Eaves Cupboards
Hinged doors set into a stud wall along the slope, the most requested and cost-effective eaves format.
02 Eaves Drawers
Pull-out units on runners for the lowest part of the void, where a hinged door has no room to open.
03 Sliding-Door Eaves Wardrobes
A flush sliding front for a long run where hinged doors would clash with the room or each other.
04 Full-Height Eaves Wardrobes
Where the pitch allows, doors run from floor to the highest usable point for genuine hanging space.
05 Eaves Bookcases & Shelving
An open, display-led alternative for books, décor and everyday items kept in easy reach.
06 Combined Eaves + Dormer Storage
Storage wrapped around a dormer window's cheeks and returns for one continuous wall.
07 Eaves Storage With Pull-Out Baskets
Wire or fabric baskets on runners, ideal for shoes, toys and other awkward small items.
08 Dressing-Room Eaves Runs
A full perimeter of eaves cupboards built for a dedicated loft dressing room.
09 Eaves Access Hatches & Half-Doors
Smaller hinged or lift-up hatches for occasional-use storage in the very shallowest part of the void.
10 Eaves + Over-Bed Combination
Pairs eaves cupboards either side of the bed with an over-bed bridging unit for a loft bedroom's full perimeter.
Eaves cupboards, designed as one continuous run.
Eaves cupboards are the most requested eaves format, and the one most easily got wrong when the doors are treated as separate boxes rather than one composition planned along the full length of the wall.
A well-planned run varies door height along its length to follow the roof pitch, so the tallest doors sit where the room is tallest and shorter hatches take over where the ceiling drops too low for a swinging door at all.
It also differs from over-bed storage: over-bed units use the vertical space directly above the mattress, while eaves cupboards use the low space along the edge of the room. In many loft bedrooms the two are planned together rather than as alternatives.
Every eaves run is set out on a scaled elevation before manufacture, so door heights, insulation depth and the finished internal reach are agreed in writing, not estimated on site.

Eaves storage only works when the roof behind it is dealt with properly.
The single biggest risk with eaves storage is closing off a cold, poorly ventilated void behind a nice-looking door. Insulation, a vapour barrier and continuous ventilation are checked and specified before any cupboard is built, not treated as an afterthought.
Fixing has to go into the floor joists and the room's stud framing, not just the roof structure itself, and rafters, purlins and roof struts are identified and worked around rather than cut into.
Water tanks, pipework and cabling often run through the eaves void in a converted loft. Where any of this is present, we plan an access panel into the design so it stays reachable rather than sealed behind a fixed wall.
Building regulations for loft conversions also cover fire safety and escape routes, so door positions and any means of escape through the room are agreed before the layout is finalised, not discovered afterwards.
- —Insulation and a vapour barrier behind every door
- —Continuous ventilation to prevent condensation
- —Fixing into floor joists and stud framing
- —Rafters and purlins identified and worked around
- —Access panels for tanks, pipework or cabling
- —Fire safety and escape-route compliance
- —Door swing clear in a confined space
- —Boarding and floor loading checked
- —Pest-proofing where soffits are open
- —Decorating and skirting around the finished run
We don't publish a fixed universal door height, because the usable height at any point along the eaves depends on your specific roof pitch. It's measured and agreed on the free design visit, not assumed from a brochure.
Eaves storage for loft conversions and dormer bedrooms.
A loft conversion is where eaves storage earns its keep most clearly: the void behind the knee wall already exists, it is simply sealed up and forgotten, so converting it into storage adds capacity without taking a single inch of usable floor.
In a dormer conversion, the cheeks and returns either side of the window are usually the shallowest, most awkward part of the room. Storage built to wrap around them turns an otherwise unusable corner into a genuinely functional cupboard.
For a loft bedroom used by a child, we keep the tallest, deepest section of the run for everyday hanging and play storage, and push seasonal or rarely-used items into the lowest, shallowest end
The same thinking applies to a loft guest room or home office: the eaves absorb everything that does not need to be on display, keeping the room feeling finished rather than like a half-converted attic.
Book a Loft Conversion Design VisitMade around the roof structure, not forced into it.
No two roofs pitch the same way, and eaves storage is the clearest example of furniture that has to be designed on site rather than ordered from a catalogue: standard cupboards simply do not follow a sloping ceiling.
In period properties, purlins, rafters and roof struts are surveyed and worked around rather than cut into, so the finished run respects the original roof structure while still delivering a usable amount of storage.
Hip roofs, gable ends and mansard conversions each change where the usable height sits along the wall, and the door and drawer layout is set out to match the pitch that is actually there, not a generic assumption about how a loft roof behaves.
Party walls, chimney breasts and existing loft hatches are treated as fixed points the design works around from the outset, not obstacles boxed over as an afterthought.
Every eaves run can serve a different purpose along its length.
Hanging & Clothing
Full-height rails kept at the tallest end of the run where headroom allows.
Seasonal Storage
Luggage, out-of-season clothing and decorations kept at the shallow end.
Drawers & Shelving
Low-level drawers for everyday items, fixed shelves for anything kept longer term.
Speciality Storage
Shoe racks, sports equipment or luggage stands built in rather than bolted on.
Lighting
Integrated lighting inside deeper cupboards, where daylight rarely reaches.
Zoning by Height
The tallest, most accessible section reserved for what you use most.
The rule of thumb: the shallowest, lowest end of the run holds whatever is used least often, and the tallest, most accessible section stays reserved for daily items.
Hinged, sliding or open doors, matched to the room..
Hinged
The most cost-effective option, and the easiest to size individually along a varying roof pitch.
Sliding
A flush track-mounted front for a long, continuous run where hinged doors would clash with each other.
Half-Doors & Hatches
Lift-up or small hinged hatches for the shallowest sections, where a full-height door has no room to swing.
If sliding or hinged wardrobes elsewhere in the room are also on your mind, our dedicated sliding wardrobes and hinged wardrobes pages cover the full range.
Specified around your room and interior..
Door Styles
Shaker, fluted, handleless, glass panel
Finishes
Matt lacquer, woodgrain, high-gloss
Interiors
Melamine, veneer, soft-close fittings
Hardware
Handles, handleless profiles, integrated lighting
Physical samples of every finish are brought to the free design visit, so colours and textures are chosen against your own walls and lighting, not a screen.
How much does bespoke eaves storage cost?
There's no single headline price for eaves storage, because the cost depends on the length of the run, the roof pitch, the door system and the finishes specified, and no two lofts are quite the same.
What we can promise is a fully itemised, no-obligation proposal after a free design visit, so you know exactly what's included before agreeing to anything.
As a general guide, a run of eaves cupboards typically costs less per metre than a full-height fitted wardrobe of comparable width, since it uses less material and a simpler door system, but the figures below are the factors that actually move the price.
Request an Itemised Eaves Storage Quote- —Length and pitch of the run
- —Door system: hinged, sliding or hatches
- —Number of doors and drawers
- —Insulation and lining required behind the doors
- —Interior fit-out (shelving, drawers, lighting)
- —Finish and hardware specified
- —Complexity of the fixing (joists, rafters, purlins)
- —Access for installation
- —Decorating or making-good required afterwards
- —Combining with a wardrobe run or over-bed storage
Fitted eaves storage or bare boarding?
| Fitted Eaves Storage | Bare Boarding / Hatch |
|---|---|
| Built to the exact pitch and length of the run | Left as a rough opening or a single small hatch |
| Insulated, ventilated and draught-sealed | Often uninsulated and prone to condensation |
| Finish matched to the rest of the room | Rarely finished, usually left as bare board |
| Fixed securely into joists and framing | Basic hatch, minimal fixing |
| Backed by a 10-year guarantee | No guarantee |
| Higher upfront cost | Lower upfront cost |
| Installed by our own in-house team | Usually left to the original builder |
Bare boarding can be the right, cheaper answer for a loft that is used purely for occasional access, such as reaching a water tank. Where the room is a genuine bedroom, office or dressing room, a fitted, insulated solution earns its cost back in daily use.
Eaves storage expertise, from first measurement to final installation.
1. Free design visit
A designer measures your roof pitch in person, along the full length of the run.
2. Structural and insulation assessment
Rafters, purlins, joists and insulation checked before anything is designed.
3. Bespoke design
Drawn to your exact roof pitch, not adapted from a standard template.
4. Roof-pitch expertise
Experienced with loft conversions, dormers and a wide range of roof shapes.
5. Premium finishes
The same materials and hardware used across our fitted wardrobe range.
6. Careful measurement
Millimetre-accurate surveying before manufacture begins.
7. In-house manufacture
Made in our own London workshop, not outsourced.
8. In-house installers
Fitted by our own installation team, with qualified specialist partners appointed where the work calls for it.
9. Insulated, ventilated fixing
Checked and signed off before handover, not assumed.
10. Itemised, no-obligation quotes
A clear proposal before you commit to anything.
11. 10-year guarantee
Qualifying fitted furniture is covered for ten years, subject to the written guarantee terms.
12. Established in London in 2009
A family-run maker working across London since 2009.
From wasted roof void to finished storage.
1. Initial Consultation
A short call to understand the loft and what you need storage for.
2. Free Design Visit
We measure on site, including headroom and any structural constraints.
3. Structural & Insulation Assessment
Confirming fixing points and insulation behind every door.
4. Design & Finishes
Agreeing the layout, door system and finish, with physical samples.
5. Bespoke Manufacture
Built to order in our London workshop.
6. Installation & Handover
Fitted by our own installers, checked and signed off with you.
Made carefully. Installed professionally. Supported after completion.
Bespoke eaves storage throughout London and surrounding areas.
Across Central, North and North-West London, including Islington, Hampstead, Primrose Hill, Highgate, Camden and St John's Wood.
In West and South-West London, including Notting Hill, Chelsea, Kensington and Fulham, for a single, considered loft bedroom scheme.
South and East London, including Wandsworth, Battersea, Clapham and Wimbledon.
Eaves storage questions, answered clearly.
It depends on the length of the run, door system and finish. We provide a fully itemised, no-obligation quote after a free design visit.
Planning a better fitted loft.
Fitted Wardrobes
The full range of hinged, sliding and walk-in wardrobes.
Loft Fitted Wardrobes
Storage designed for sloped ceilings and loft conversions.
Over-Bed Storage
Using the space directly above the bed in a low-headroom room.
Sliding Wardrobes
Flush, space-saving doors for narrower rooms.
Corner & L-Shaped Wardrobes
Making the most of an awkward room corner.
Dressing Room
A dedicated space for a full walk-in dressing room.
Tell us about your eaves storage.
Share a few details about your room and we'll arrange a free design visit, with no obligation to proceed.
- —Fast response time
- —Free design visit
- —Itemised, no-obligation proposal
- —10-year guarantee
Create beautiful storage designed around your roof.
From a single eaves cupboard to a full loft storage wall, built and fitted by our own London team.
